RPM Supplies

CODE: G32
This kick wheel has been designed with the following objectives in mind, low cost, minimum maintenance and comfort in use. These have been achieved by using a high quality method of construction. The momentum of the wheel is obtained by a heavy flywheel mounted onto a steel shaft which in turn runs in sealed bearings. This provides a smooth quiet operation and absolute minimum maintenance. The wheel tray is constructed of plastic and a optional drain can be fitted if required . For comfort of use a padded seat is provided and the kick bar and foot rest can be quickly and easily reversed for left or right hand use depending on Individual choice. A 225 mm Wheelhead is fitted as standard. The overall effect is a wheel which gives maximum trouble free operation with minimum cost.

Specifications:

Overall Size Length 1060 mm x Width 650 mm x Height 700 mm approximately .

Working Speed Up to 130 rpm .

Nett Weight 65 Kg approximately

CODE: G33
This machine is a very functional ruggedly constructed standing kick wheel designed to give many years of , trouble free service and is therefore most suitable for school use. The momentum of the wheel is obtained by a heavy flywheel which in turn runs in sealed ball bearings. This provides a smooth quiet operation and absolute minimum maintenance. Standard fittings include a 225mm aluminium wheelhead, splash tray and waste pipe.

Specifications:

Overall size .Length 675mm x Width 620mm x Height 950mm approximately .Working speed Up to 130rpm .

Nett Weight 55Kg.