CODE: G49E
The Gladstone E range of pugmills has been specifically designed for the studio and classroom environment. These machines being both compact and lightweight make them easily transportable. The 49E is fitted with a hopper safety grid and thermal overload safety switch as standard.
|
Technical specification: 4" aluminium body, 2' (5Omm) extrusion Split body to facilitate easy cleaning, ndividual Nylatron blades mounted on a hexagonal steel shaft, Geared motor reduction drive single or three phase Output 190-200 Kg / 400-450 lbs per hour approx, |
CODE: G50E
The Gladstone G50E is the same compact design as the G49E but has a larger 150 mm barrel with a 75mm outlet. The G50E has a greater out put and due to its larger hopper is easier to use than its smaller cousin , the pug mill is supplied as standard with a thermal overload switch .
|
Technical specification: 6” aluminium body, 3” (75mm) extrusion, Split body to facilitate easy cleaning, Individual aluminium blades mounted on a hexagonal steel shaft, Geared motor reduction drive single or three phase Output 30OKg per hour approx |
CODE: G55
4” outlet Vertical Pugmill
The 100 mm 4” Vertical Pugmill is an extremely powerful and robust extruder with the capacity to handle all types of clays. The main body is manufactured from aluminium, with a auger also made up of individual alloy blades which can be altered to change there configurations to suit different types of clay. The Auger is mounted through two taper thrust bearings and is driven via a flexible coupling by a 1.1 kW (1.5 Hp) helical geared motor with a final drive output of 18 rpm. The G55 is fitted with a safety interlock switch which eliminates the need for a grid in the loading hopper, making it extremely easy to use. The pugmill is supplied with a separate nose cone that is pre-drilled to facilitate the fitting of different die plates for coil building etc.
|
Technical specification: Dimensions 760mm long x 760mm wide x 2300mm High approximately. 300Kg. weight approximately 380— 415 V, 50 Hz Three phase |
CODE: G48
The G48 is a 50 mm out let de-airing pug mill this machine can be offered in range of specifications and is ideal for the small studio
Or laboratory use . The standard machine incorporates Aluminium barrels and nose cone with Nylatron blades . The auger is powered by a in line helical drive motor and gearbox and the pug mill is supplied complete with a high volume vacuum pump.
|
Technical specification: Construction— 4” (100 mm ) Aluminium body with a 50 mm out let split body and nose cone to facilitate easy cleaning , ndividual Nylatron blades mounted on a hexagonal shaft . Geared reduction drive single or three phase. Vacuum pump— Rotary vane oil immersed –28”(-1 Bar ) Capacity. Dimensions—1260 mm long x 310 mm wide x 460mm high. Out put 220 Kilos per hour. Weight— 65 Kilos. Optional extras—Laboratory specification pack, Variable speed drive , dies plates , Pug stand. |
CODE: G76
The G76 is a 75 mm out let de –airing pug mill , it is ideal For the school and educational establishments or the more busier Studio environment . The pug mill can produce plastic clay of good quality that can be thrown with straight from the machine .
|
Technical specification: Construction— 6” (150 mm ) Aluminium body with a 75 mm out let split body and nose cone to facilitate easy cleaning , individual Aluminium blades mounted on a hexagonal shaft . Drive— 1.1 KW (1.5 Hp ) Gearedreduction drive single or three phase. Vacuum pump— Rotary vane oil immersed –28” (-1 Bar ) Capacity . Out put 320 Kilos per hour. Weight— 145 Kilos Stainless steel Auger , tile nose cone , die plates , Pug stand. |
CODE: G51
The G51 is the entry to our standard range of Pug mills, it Has a 100 mm split Aluminium barrel to facilitate easy cleaning with a 50 mm outlet . The auger consist of individually mounted Nylatron blades that can be altered in configuration so that a greater mixing action or a faster extrusion rate can be obtained . Drive is supplied from a high torque helical drive gear box and the pug mill is supplied complete with all its necessary switch gear .
|
Technical specification: Drive— 0.37 KW (0.5Hp) with helical reduction gear box All Aluminium body 100 mm in diameter with a 50 mm outlet fitted with Nylatron blades mounted on a hexagonal shaft with taper roller bearings, split body for easy cleaning, Thermal overload starter with safety interlock switch. Output— 260 Kilos per Hour Weight 55 Kilos. |
