CODE: G165The Gladstone spraybooth has been designed to meet the ever increasing need to protect our environment. The water Wash spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable stainless steel pre filter and finally into a washable filter bag. The excess glaze is washed into the tank and can at a later date be reclaimed depending on the type and colour of the glaze. There is a ball valve to allow the water to be drained and the contents of the tank removed. Any glaze materials can also be removed and disposed of safely. The booth is mounted on four castor wheels. The G165 is primarily designed to be used by the studio potter and educational faculties for low volume production, therefore the booth does not need ducting to atmosphere making it portable around the studio environment. |
TECHNICAL DATA
G165 Spraybooth
Size Height 1655 mm approx. x Width 720 mm approx. x Depth 1290 mm approx.
Fan 2000CFM
Air extraction 250 CUFT/min
Steel construction
Internal parts stainless steel
Water tank Polypropylene
Switchgear Thermal overload protection
Weight 118 Kg approx.
Power 220/240 v 5OHz Water Wash
Hood internal dimensions 638mm x 625mm x 420mm deep. Working depth 350mm
CODE: G166The Gladstone G166 is a larger version of our popular G165 model. The Gladstone spraybooth has been designed to meet the ever increasing need to protect our environment. The water Wash spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable stainless steel pre filter and finally into a washable filter bag. The excess glaze is washed into the tank and can at a later date be reclaimed depending on the type and colour of the glaze. There is a ball valve to allow the water to be drained and the contents of the tank removed. Any glaze materials can also be removed and disposed of safely. The booth is mounted on four castor wheels. The G166 is primarily designed to be used by the studio potter and educational faculties for low volume production, therefore the booth does not need ducting to atmosphere making it portable around the studio environment.This unit has a hood internal size of 1 metre x 1 metre and is equiped with a separate water tank that can be detached to aid cleaning. |
TECHNICAL DATA
G166 Spraybooth
Size—Height 16801mm x Width 1200mm x Depth 1585mm approx.
Construction Internal parts stainless steel
Water tank/hood Polypropylene
Switchgear Thermal overload protection
Weight 180Kg approx.
Power 220/240 v 50 Hz
Air extraction 250cfm/min
Hood internal dimensions 1000mm x 1000mm x 585mm deep.
Working depth 500mm.
Please note under heavy use we advise that the booth is extracted to atmosphere
Both the G165 and G166 Water Wash Spraybooths use a sophisticated baffle system to prevent water take through into the filter bag, they are designed to be used with water based material only but can be adapted if required for solvents. If the Spraybooths are to be used in a production environment it may be necessary to duct the Spraybooths to atmosphere, please contact our technical department if you require further advice.
